LNG船液货装卸系统分析软件平台研究

提出了一种基于VC＋＋平台和数据库技术的LNG船液货装卸系统设计及分析的软件平台系统,详细介绍了其内容、结构和实现方法。该系统配有与管路阻力计算相关的管道、阀件、液货舱、附件等的数据库,能够按目标船的装卸要求,直接组态设计液货装卸系统管网系统。设计人员可以在每一个模型设计完成后直接进行优化并确定液货泵的排量、压头、液货管路的管径、长度等设计信息,仿真计算装卸过程中各时间段上的的流量、节点压力、剩余舱内液体容积等各项参数。不仅简化了液货装卸系统的设计过程和计算校核的时间,而且更加方便灵活。     

半潜船总体性能设计

论述了我国首艘拥有自主知识产权、多个技术指标达到或超过国际水平、自主研发的自航半潜船"WISHWAY"的船型特点及主要总体性能设计。     

建立和完善道路运输装载安全标准体系势在必行

目前我国对于道路运输装载安全的管理是整个道路运输安全管理体系中的薄弱环节,装载安全标准基本上还是空白,建立和完善道路运输装载安全标准体系势在必行。     

An efficient and exact event-based algorithm for solving simplified first order dynamic network loading problems in continuous time

In this paper a novel solution algorithm is proposed for exactly solving simplified first order dynamic network loading (DNL) problems for any generalised network. This DNL solution algorithm, termed eLTM (event-based Link Transmission Model), is based on the seminal Lighthill–Witham–Richards (LWR) model, adopts a triangular fundamental diagram and includes a generalised first order node model formulation. Unlike virtually all DNL solution algorithms, eLTM does not rely on time discretisation, but instead adopts an event based approach. The main advantage of this approach is the possibility of yielding exact results. Furthermore, an approximate version of the same algorithm is introduced. The user can configure an a-priori threshold that dictates the approximation error (measurable a-posteriori). Using this approximation the computational effort required decreases significantly, making it especially suitable for large scale applications. The computational complexity is investigated and results are demonstrated via theoretical and real world case studies. Fixed periods of stationary demands are included adopting a matrix demand profile to mimic basic departure time demand fluctuations. Finally, the information loss of the approximate solution is assessed under different configurations.     

单向复合材料高应变率下材料特性的研究(英文)

在船舶领域,复合材料及夹芯复合材料板梁结构已大量应用在舰船结构中,尤其游艇及复合材料高速艇上.在运行过程中,这些结构有时很可能会受到如砰击、碰撞等动态载荷或高速冲击载荷.然而到目前为止,大多数的结构设计所用到的材料特性仍基于低应变率情况下的准静态测试结果.该文研究了高速艇等结构中的纤维增强复合材料高应变率情况下的材料特性,通过引入一种粘弹性模型来模拟并分析研究对象.并在世界先进的INSTRON高应变率材料试验机上设计并完成了相关试验,验证了该枯弹性模型、确定了模型中的材料参数.该粘弹性模型然后被用来研究分析应变率对单向复合材料机械特性的影响.     

上海市轨道交通三号线一期工程二标预应力简支箱梁支架设计与验算

本文以上海市轨道交通三号线一期工程二标预应力简支箱梁的施工为例 ,介绍了作为现浇钢筋混凝土结构承重支架的扣件式钢管支架及桁架式龙门支架的设计与验算方法 ,从而保证桥梁现浇混凝土结构的施工质量及施工安全 ,并有效降低工程成本     

跨坐式单轨交通预应力钢筋混凝土轨道梁动力性能试验与分析

对重庆跨坐式单轨交通的预应力钢筋混凝土轨道梁、墩体结构进行了动力试验,测试其动力特性及在不同行车速度下的动力响应.测试及分析结果表明,预应力钢筋混凝土轨道梁结构实测自振特性与理论计算结果基本相符;轨道梁结构具有较好的竖向刚度和结构强度;单轨车辆以不同速度通过桥梁时,试验梁横向基频、横向加速度等横向振动性能与<铁路桥梁检定规范>的要求有一定差异;运行单轨车辆对轨道梁结构有一定的冲击作用,但不显著;墩体结构横向动力性能良好,满足限值要求.     

荷载作用下软土地基低路堤应力应变分布规律分析

该文针对软土地基低路堤内部应力应变状况,利用有限元方法分析了不同荷载作用、不同土基强度以及不同的硬壳层厚度对低路堤内部的应力应变的影响,并探讨了不同影响因素下横向的应力应变分布状况。分析结果表明,采用低路堤设计,利用人工硬壳层等措施可以满足路用性能的要求。     

A link-node complementarity model and solution algorithm for dynamic user equilibria with exact flow propagations

In this paper, we propose a link-node complementarity model for the basic deterministic dynamic user equilibrium (DUE) problem with single-user-class and fixed demands. The model complements link-path formulations that have been widely studied for dynamic user equilibria. Under various dynamic network constraints, especially the exact flow propagation constraints, we show that the continuous-time dynamic user equilibrium problem can be formulated as an infinite dimensional mixed complementarity model. The continuous-time model can be further discretized as a finite dimensional non-linear complementarity problem (NCP). The proposed discrete-time model captures the exact flow propagation constraints that were usually approximated in previous studies. By associating link inflow at the beginning of a time interval to travel times at the end of the interval, the resulting discrete-time model is predictive rather than reactive. The solution existence and compactness condition for the proposed model is established under mild assumptions. The model is solved by an iterative algorithm with a relaxed NCP solved at each iteration. Numerical examples are provided to illustrate the proposed model and solution approach. We particularly show why predictive DUE is preferable to reactive DUE from an algorithmic perspective.     

矿化垃圾反应床处理印染废水系统驯化效果

为开发廉价的吸附剂和生物载体,将矿化垃圾资源化利用,在实验室建立矿化垃圾反应床处理模拟染料废水,考察容积负荷及水力负荷渐增法对反应床内微生物的驯化效果。训化结束时,容积负荷渐增法出水中COD,NH3-N,TP,MB浓度分别为49.81,3.06,0.45,1.09 mg·L-1,驯化时间越长出水效果越稳定,去除率维持在98%以上。水力负荷渐增法驯化结束时出水COD,NH3-N,TP,MB分别为81.00,4.39,0.15,1.38 mg·L-1。结果表明两种驯化方法均可取得较好的驯化效果,容积负荷渐增法去除效果优于水力负荷渐增法。在矿化垃圾反应床处理染料废水应用中,将选用容积负荷渐增法对矿化垃圾进行驯化,同时需保证一定的训化时间。